1,043.00€ excl. VAT
Long Range RC Transmitter Station XPAD2-MINIJOY is designed for FPV-UAV flights of short and long distance up to 180 Km. It has 500 mW power and -115 dBm sensitivity, dual band 866 – 960 MHz, long range RC transmitter, integrated dual pad RC joysticks, GPS, video receiver and more.
This RC Station is part of the superb eXtended Long Range System D2 (XLRS_D2) kit.
1.0- Left rotary encoder: To select flight mode.
1.1- Leds, flight modes and functions. They indicate the selected flight mode.
1.2- SMA-Female Connector for Radio Control of 866-960MHz. You can connect standard or dual antennas to have greater range, according to your requirements.
1.3- RF (Radio Frequency) Blue LED.
1.4- Connector SMA-Female for Video of 2.4GHz. You can connect standard or dual antennas to have greater range, according to your requirements.
1.5- LCD Display, high contrast backlit Blue/White for configuration and telemetry display.
1.6- Status Leds. They show in which situation is each state.
1.7- Right rotary encoder: For camera movement “PAN” left/right or Optional channel.
1.8- Left RC Mini Joystick/Pad. Control throttle and rudder (Mode 2).
↑ Increase throttle (CH3).
↓ Reduce throttle (CH3).
← Left tail rudder (CH4).
→ Right tail rudder (CH4)
1.9- Left-hand side Micro Joystick and buttons.
2.0- Speaker and Bluetooth:
Speaker: For sound effects of the system.
Bluetooth: For connection to other devices (PC, Laptop, Tablets).
2.1- Central 5-positions Micro Joystick. Four to navigate through the menu (Left, right, up and down), center to “Accept/Ok” and hold down to turn on the XPAD2 system.
2.2- Central rotary encoder, to select desired values in percentage in XLRS_D2 system settings.
2.3- Button “Exit/OFF”. To exit the menu or submenus. Hold down “ to turn off the XPAD2 system.
2.4- GPS. For positioning and location of the XPAD2 system (e.g. for being on the move while flying and have a dynamic Return-To-Home).
2.5- Right-hand side Micro joystick and buttons.
2.6- Right RC Mini Joystick/Pad. Control elevator and ailerons (Mode 2).
↑ Down elevator (CH2).
↓ Up elevator (CH2).
← Left aileron roll (CH1).
→ Right aileron roll (CH1)
2.0- Input Charger: To charge the XPAD2 – MINIJOY, you can use a XCHARGERD2 charger with Mini USB interface powered via PC or a standard mobile charger. (XCHARGERD2 is included with the XPAD2-MINIJOY).
It can also be charged with a standard RC charger.
2.1- RCB Mini jack connector: The RCBus is a serial bus data to extend and test XPAD2 devices, as Head tracker or tracking antenna.
2.2- Input SPPM: SPPM to connect a standard RC station on the trainer port and send its joystick movements through Long Range.
2.3- AUDIO/VIDEO Connectors: Through the two Video/Audio connector jacks you can directly connect video/FPV glasses or headset, a TV monitor or a standard video recorder.
2.4- Mini USB Port: Used to configure the system, send and receive commands, receive telemetry, have online access to equipments connected via radio and update the system with the BootADMD software.
|Maximum RC and Telemetry range||180 Km|
|Dual Band RF||ICM 866 MHz or ISM 960 MHz. Configurable for other bands|
|Frequency||866 – 868 and 902 – 960 Mhz. Configurable|
|RF Filtrate||Digital. Compatible with 2.4 and 5.8 GHz video|
|Channeling||50 Khz. 100 KHz for LRS compatibility|
|Modulation||50 kb. AFA (Adaptative Frequency Agility), FHSS. 19-38 kb. GFSK for LRS compatibility|
|RSSI||Digital. Calibrated ± 1 dBm|
|RF Module||5G Radio, XLRS_D2|
|PPM Refreshment||40 Hz|
|Fail Safe||Yes. Programmable|
|Dimensions||212 x 106 x 42 mm|
|Maximum range||30 Km (Depending on antenna used)|
|Channel selection||CH1: 2414 MHz, CH2: 2432 MHz, CH3: 2450 MHz, CH4: 2468 MHz, CH5: 2490 MHz, CH6: 2510 MHz, CH7: 2390 MHz, CH8: 2370 MHz|
|Screen||LCD, Backlit high-contrast Blue/White|
|RC Mini-Joysticks (Dual Pad)||RC Mini-Joysticks for flight control|
|1 Input Mini Jack||RCBus. It is a serial bus data to extend and test XPAD2 devices, as Head Tracker|
|1 Input Jack||Audio-Video. You can directly connect video/FPV glasses or headset, TV monitor or standard video recorder|
|1 Input Jack||SPPM (Trainer)|
|1 Mini USB Input||Used to configurate the system, send and receive commands, telemetry, update and more|
|2 Antenna Connectors||1-SMA-Female RC (866-960 MHz), 1-SMA-Female Video (2.4 GHz)|
|3 Micro Joysticks||5-position micro joysticks for control and menu selection/ trim configuration|
|3 Rotate Encoders||Flight mode selection, configuration of control values (in %) and video camera “PAN” movement|
|1 Button “Exit/Off”||To exit the menu or sub menu selected and if holding down to disable the XPAD2 system|
|6 Buttons||3-Left and 3-Right for menu configuration|
|Radio Beacon Locator||Radio Beacon Locator + GPS|
|Note||Individual cells are protected electrically over voltage, low voltage and excess consumption|
|Description||XPAD2 charger with Mini USB interface|
|Connection||Mini USB input|
|2 Leds||1 Charging, 1 Full charge|
|Dimensions||32.5 x 21 x 9.5 mm|